High temperatures won’t harm heat-resistant flooring and minimize the risk of fire.
Unprotected floors that sustain damage from extreme heat will exhibit a variety of problems, such as warping, cracking, and melting.
Even though a newly-coated epoxy floor won’t last forever, regular care will increase its lifespan and protect its look over time. Here’s how you can maintain the condition of your floors with Kansas City epoxy flooring.
Why Maintain The Floor?
Before giving you the information you need for floor maintenance, you must be wondering why one must maintain heat-resistant floors in the first place.
Epoxy coating, especially when high-grade epoxy is utilized, can improve the thermal resistance of flooring. This is another way that heat-resistant epoxy may increase safety in a commercial kitchen. It can lessen the chance of a fire in addition to shielding your flooring from harm from hot pots and boiling water.
Commercial kitchens frequently include flames and high temperatures. Thus, particular safety measures must be taken. You may prevent heat damage to your floor and raise the safety of your kitchen by covering it.
One of the finest methods to keep a sanitary surface in commercial kitchens is using epoxy flooring. Epoxy coating is practical, economical, and has several advantages.
Cleaning Time
Create a regular floor maintenance schedule to extend the lifespan of your new flooring investment. Take into account these tips to maintain the condition of your floors:
Daily Sweep
To stop dust and filth from settling on your floors, sweep them every day using a broom or other mechanical cleaning device. Use a soft-bristled brush if using a mechanical sweeper.
Stiff brushes might damage the floor coating and reduce shine. Placing mats next to any entryways is another excellent practice to reduce the buildup of dirt and dampness.
A Good Scrub
The frequency of scrubbing ultimately relies on how much and what kind of contamination generally affects your epoxy floor finish.
However, using the right brush and detergent, a deep scrub of areas where dirt could build up in floor creases and cracks keeps the floor from degrading and retains a clean visual profile.
Other than brushes, it is preferable to mop all floors at least once a week and high-traffic areas every day. Areas with a lot of oil and grease will also need constant care. Use a mop and bucket or an automated scrubber for increased productivity.
Manage Spills
Before they can harm the floor finish or become a safety issue, wipe up any liquid spills immediately.
Additionally, strong liquids like caustics, acids, and solvents are more likely to damage or altogether remove the heat-resistant coating or sealer from a floor the longer they sit there.
If chemicals are often used in the region, ask the coating manufacturer for information on the floor coating’s chemical resistance qualities.
If stains emerge on your epoxy floor coating, start with a weak solution and work your way up to more potent removers until the stain is removed. When working with any chemicals, make sure you always use rubber gloves and the appropriate eye protection.
Grease & Oil Stains
Oil and grease can leave stains on your floor coating, especially if they stay there for more than 24 hours. It’s crucial to use TSP right away after a spill and to follow the directions on the detergent labels
Dried Spills & Stubborn Stains
A spill that isn’t cleaned up right once and dries in situ might leave a film or a stubborn stain on your heat-resistant floor coating. To solve this, avoid harming the coating when you remove any residue using a plastic tool. After that, clean the soiled area by rinsing a clean cloth with an ammonia household cleanser.
Repair Minor Damages
Additionally, any significant dents or scratches in the floor’s protective coating must be fixed immediately. Avoid dragging heavy equipment, pallets, or sharp objects across the floor by scraping, sliding, or dropping them without wearing the appropriate safety gear.
These harmed places enable moisture to penetrate the covering, which may cause peeling. Additionally, keep caustic cleaning agents and stiff-bristle brushes away from your flooring.
In case you need help with doing these minor repairs, you can always ask for help from Kansas City epoxy flooring.
Meanwhile, the methods below should be followed to repair damaged sections of your floor coating:
- Use detergent to remove any grease, oil, and dirt from the region with a towel or anything similar.
- Hand-sand the dings/gouges with 100-grit sandpaper, then feather the edges until they are smooth.
- Rinse the floor well, then give it time to completely dry.
- To fix the damaged area, follow the directions on how to use the sealant and use the same coating substance as it originally was.
Clean Any Burns Or Friction Marks
The floor covering can frequently sustain rubber burns or skid marks from forklifts, trolleys, or anything else with wheels. Rather than leaving these marks to leave a literal mark on your heat-resistant floor, tend to it right away to ensure that friction does not accumulate and leave a dip or melt from constant friction.
